Foliage Condition Monitor

Foliage condition monitor provides a pest and disease-free environment by reducing the wetness periods on the surface of leaves. The humidity sensor maintains the moisture levels by preventing the leaves from fungal growth. The air temperature sensor controls the temperature differences and maintains climatic conditions. These monitor conditions dew point formation on the surface of leaves by preventing from the foliar diseases. These sensors also monitors the leaf surface temperatures and aeration by maintaining pest free environment. This monitored data is sent to the cloud for analysis which guides the farmers to maintain optimum conditions promoting to efficient crop growth

Usage Benefits



4″ x 0.875″ x 0.031″ thick top sensor grid is 3″ x 0.75″

Supply Voltage
5–15 VDC

Frequecy Output
50 Hz dry @ ∞ ohms 10 khz wet @ 0 ohms open drain square wave

Voltage Output
0.2 volt dry to 1+ volt wet less than 0.01% per Volt supply variation

Supply Current
0.2 mA dry to 1+ mA wet dry current tolerance 0.19 to 0.21 mA

Operating Temperature
0°C to +70°C no meaningful signal below 0°C

Connection to Data Logger
5 foot cable

4 Wire Flat Telephone Cable Red
+ 5 to 15 volts DC black: common green: frequency output signal yellow or white: voltage
output signal Please refer to wiring diagram